Bazooka MAA465 Specifications download pdf (Page 8)

ENGLISH

CHIL

FUSES

20A

SPEAKERS

+12V

PROTECT

POWER

GND

REM

SP SP SP SP

20A

BATTERY

+12V

BATTERY

+12V

POWER CONNECTIONS

IN-LINE POWER FUSE

MOUNTED WITHIN 12"

FROM BATTERY RECOMMENDED

IN-LINE POWER FUSE

MOUNTED WITHIN 12"

FROM BATTERY RECOMMENDED

(NOT PROVIDED)(NOT PROVIDED)

RADIO'S REMOTE

TURN-ON OUTPUT

RADIO'S REMOTE

TURN-ON OUTPUT

Connect the amplifier to the boat's battery (+).

At times, the amplifier will need to draw large levels of current that cannot be provided by

any circuit in the boat's fuse box. We recommended using an 4 to 8 gauge power wire for

your connections depending on the amplifier and length of the wire. Strip one end of the

wire to crimp on a barrier spade. Loosen the +12V screw terminal and insert the power

wire with the barrier spade and tighten. Use caution to make sure no stray wire stands

come in contact with surrounding terminals causing short circuits. Run the wire directly

to the positive terminal of the boat's battery. Make sure to use an in-line fuse within 12” of

the boat's battery to protect the electrical system and amplifier against short circuits

and/or power surges.

Connect the ground terminal of the amplifier to the boat’s battery (-).

For the ground connection, we recommended using an 4 to 8 gauge power wire (Black) for

your connections depending on the amplifier and length of the wire. Strip one end of the

wire to crimp on a barrier spade. Loosen the “GND” screw terminal and insert the power

wire with the barrier spade and tighten. Use caution to make sure no stray wire stands

come in contact with surrounding terminals causing short circuits. Run the wire directly

to the negative terminal of the boat’s battery

Connect the remote terminal of the amplifier to a switchable +12V source.

This connection allows the amplifier to be turned on and off with the power control of the

radio. If the radio has a REMOTE output terminal, connect it to the amplifier's terminal

marked REMOTE (using a 16 gauge wire or heavier). Now when the radio is turned on, the

amplifier will automatically turn on. This connection can also be made to the radio’s Power

Antenna wire.

IMPORTANT! Before making any connections, disconnect the boat’s battery until the

installation is completed to avoid possible damage to the electrical system.

94.794.7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Comments to this Manuals

No comments

Bazooka MAA465 Specifications Page 8

Comments to this Manuals

Related products and manuals for Car audio amplifiers Bazooka MAA465